Search results for: hdmi
SE 000985 A 500759 TX HLO HDMI over IP PoE TX with Loop Out User Manual_v1.0
500759-TX-HLO
Read MoreHDMI over IP PoE TX with Loop Out, UHD-4K
The HDMI over IP PoE TX, UHD-4K (model 500759-TXHLO) allows HDMI video equipment supporting up to 4K @ 30Hz or 1080p @ 60Hz resolution to be connected and extended to create an independently distributed video network. 100’s of Single Displays and Video Wall Displays of user configurable size (X by Y) may be supported, depending on network bandwidth. In addition, the unit features a local HDMI video output which allows the video source to be displayed on a local display.
The unit can be connected via Cat5e/6 cable up to 330ft (100m) from an Ethernet Switch, and supports PoE (PD) when powered by a PoE (PSE) Ethernet Switch. An IR Emitter or IR Sensor, if required, may be purchased separately for IR based remote control applications.
The MuxLab Pro Digital Network Controller (500812) and MuxControl App are available to simplify configuration and management of this and other MuxLab AV over IP networked devices via Smartphone and Tablet.
Read MoreSE 000849 A 500443 HDMI 8×8 Matrix Switch, 4K60 Operation Manual_v1.2
500443-US, 500443
Read MoreSE 000906 A HDMI Mono Extender Kit (LR) Installation Guide
500450-LR
Read MoreHDMI Module
HDMI Module for Table Top Panel Black
Read More94 000909 A 500777 RX Man HDMI over IP PoE WP RX_v1.0
SE 000929 A 500777 TX DECO Man HDMI VGA USB over IP PoE WP TX_v1.0
SE-000708-A – HDMI Fiber Extender Kit Installation Guide
500460
Read MoreSE-000903-A-94-000903-A – 500759 TX Dante HDMI 4K over IP PoE Extender IG
500759-TX-DANTE
Read MoreHDMI 2.0 Fiber Extender Kit
The HDMI 2.0 Fiber Extender Kit, 500464-V2 enables the user to transmit 4K (4096×2160) video at 60Hz signal up to 3300ft (1000m) via OM4 multi-mode fiber, with any form of scaling or data compression being applied to the signal. This device supports a total data throughput of 18Gbps (6Gbps per lane). The unit supports HDR10+, Dolby Vision and HLG, as well as CEC, ARC, EDID and HDCP 1.4 & 2.2.
The unit supports one (1) SC connector for the link connection. Power to the Transmitter module may be provided by the video source, if the source can supply sufficient current, otherwise a USB Power source is provided. This kit includes two (2) 1m HDMI 2.0 Premium Certified cables for connecting to source and sink devices.
Applications: Residential, commercial and professional AV systems, industrial megapixel video, classroom projector systems, digital signage, inter-building systems, medical video systems.
Read More