Search results for: 4k video display
HDMI/Dante over IP PoE Transmitter, UHD-4K
The HDMI/Dante over IP PoE Transmitter, UHD-4K allows HDMI video equipment supporting up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0), plus Dante audio equipment to be connected and extended to create an independently distributed audio and video network. 100’s of Single Displays and Video Wall Displays of user configurable size (X by Y) may be supported, depending on network bandwidth. Audio can be independently distributed to 100’s of Dante supported audio devices. Supports HDR at up to 4K @ 30Hz (4:2:2).
The unit can be connected via Cat5e/6 cable up to 330ft (100m) from an Ethernet Switch, and supports PoE (PD) when powered by a PoE (PSE) Ethernet Switch. An IR Emitter or IR Sensor, if required, may be purchased separately for IR based remote control applications.
The MuxLab Pro Digital Network Controller (500811) and MuxControl App are available to simplify configuration and management of this and other MuxLab AV over IP networked devices via Smartphone and Tablet.
HDMI 4K over IP PoE Receiver
Finally get the 4K video wall display you have always wanted with this HDMI 4K over IP solution which allows HDMI equipment supporting up to 4K @ 30Hz or 1080p at 60Hz resolution to be connected and extended to create a video wall of user-configurable size (X by Y) supporting 100’s of screens, depending on network bandwidth, utilizing one Receiver for each display in the array.
Transmitter (500759-TX) and Receiver (500759-RX) can be connected via Cat5e/6 cable up to 330ft (100m) from an Ethernet Switch. The Transmitters and Receivers support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch. The IR Emitter and IR Sensor, if required, may be purchased separately for IR based remote control applications. Look no further for video over IP solutions.
The MuxLab Pro Digital Network Controller (500812) is available to simplify configuration and control and allows for third-party smartphone and tablet management.
Note: This device supports PoE (PD), and is intended to be powered via a PoE (PSE) Ethernet Switch. If a PoE (PSE) Ethernet Switch is unavailable, then the power supply (500993) may be purchased separately.
IMPORTANT NOTE
A new firmware version 2.0 has been released, which includes important enhancements such as support for infrared Pronto codes, numerous bug fixes,ÿimproved system performance, and support for the new models including the 500778 & 500777-RX. Please see the Release Notes for further details.
Firmware version 2.0 or greater for this device will only operate correctly with compatible devices that are also running the same firmware version 2.0 or greater.ÿIf your existing installation includes compatible devices with older firmware versions, you have two options:
- Either upgrade all your existing compatible devices to firmware version 2.0 or greater.
- Or downgrade the new device to a firmware version lower than 2.0.
Firmware versions for your compatible devices are available at the following MuxLab website link: https://muxlab.com/support?section=software-and-firmware
Read More12G-SDI 1X8 Splitter, 4K/60
The 12G-SDI 1×8 Splitter, 4K/60 (500728) allows one (1) 12G/6G/3G/HD/SD-SDI source to be distributed and amplified to up to eight (8) 12G/6G/3G/HD/SD-SDI displays. The splitter supports up to 4K (3840 X 2160) video and HD audio, including 480i (SD-SDI), 720p/1080i (HD-SDI), 1080p (3G-SDI), 4K/30 (6G-SDI) and 4K/60 (12G-SDI). The device automatically detects the 12G/6G/3G/HD/SD-SDI signal and re-clocks and regenerates the signal at the output for extending distances between source and displays.
Read More12G-SDI 1X4 Splitter, 4K/60
The 12G-SDI 1×4 Splitter, 4K/60 (500727) allows one (1) 12G/6G/3G/HD/SD-SDI source to be distributed and amplified to up to four (4) 12G/6G/3G/HD/SD-SDI displays. The splitter supports up to 4K (3840 X 2160) video and HD audio, including 480i (SD-SDI), 720p/1080i (HD-SDI), 1080p (3G-SDI), 4K/30 (6G-SDI) and 4K/60 (12G-SDI). The device automatically detects the 12G/6G/3G/HD/SD-SDI signal and re-clocks and regenerates the signal at the output for extending distances between source and displays.
Applications:
- Video production
- Post production
- Broadcasting
- Studio to Studio
- Live event
- Mobile video
- Medical imaging display
HDMI 4K over IP PoE Transmitter
Finally get the 4Kÿvideo wall display you have always wanted with this HDMI 4K over IP solutionÿwhich allows HDMI equipment supporting up to 4K @ 30Hz or 1080p at 60Hz resolution to be connected and extended to create a video wall of user-configurable size (X by Y) supporting 100’s of screens, depending on network bandwidth, utilizing one Receiver for each display in the array.
Transmitter (500759-TX) and Receiver (500759-RX) can be connected via Cat5e/6 cable up to 330ft (100m) from an Ethernet Switch.ÿThe Transmitters and Receivers support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch. The IR Emitter and IR Sensor, if required, may be purchased separately for IR based remote control applications.
The Pro Digital Network Controller (500812) is available to simplify configuration and control and allows for third-party smartphone and tablet management.
Note: This device supports PoE (PD), and is intended to be powered via a PoE (PSE) Ethernet Switch. If a PoE (PSE) Ethernet Switch is unavailable, then the power supply (500993) may be purchased separately.
IMPORTANT NOTE
A new firmware version 2.0 has been released, which includes important enhancements such as support for infrared Pronto codes, numerous bug fixes, improved system performance, and support for the new models including the 500778 & 500777-RX. Please see the Release Notes for further details.
Firmware version 2.0 or greater for this device will only operate correctly with compatible devices that are also running the same firmware version 2.0 or greater. If your existing installation includes compatible devices with older firmware versions, you have two options:
- Either upgrade all your existing compatible devices to firmware version 2.0 or greater.
- Or downgrade the new device to a firmware version lower than 2.0.
Firmware versions for your compatible devices are available at the following MuxLab website link: https://muxlab.com/support?section=software-and-firmware
Read MoreMuxLab’s New Transmitter Delivers 4K/60 Video Around the World with Support for Streaming Video Codecs including H.264/5 and MotionJPG
At ISE, MuxLab will showcase its newest signal transmitter solution that utilizes an IP-based Ethernet network to stream AV from a variety of sources. Because it supports the H.264/H.265 video codec setting, this HDMI over IP H.264/H.265 PoE Transmitter, 4K/60 (model 500764-TX) can stream AV content from the Internet with near zero latency, delivering it locally,…
Read MoreHDMI/USB over IP PoE Wall Plate Receiver, UHD- 4K (White)
The HDMI/USB over IP PoE Wall Plate Receiver, UHD- 4K installs in a double-gang wall box to provide a convenient interface for HDMI display equipment and USB connectivity to manage Smart White Boards and other USB based devices. The unit has one (1) HDMI- Out, one (1) Audio-Out, two (2) USB 2.0 Type-A ports, two (2) USB 1.1 type-A ports, and one Ethernet Port. It supports video up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0). The HDMI/USB over IP PoE Wall Plate Receiver, UHD-4K allows HDMI and USB equipment to be extended up to 330ft (100m). The unit supports an RS232 port plus a Directional IR port to manage remote devices. The device may be powered via a PoE enabled 1Gig Ethernet Switch.
Applications:
- Commercial and residential AV systems? K-6 and K-12 classroom AV systems
- Digital signage
- Boardroom systems
- Collaborative PC systems
- Medical information systems
IMPORTANT NOTE!
A new firmware version 2.0 has been released, which includes important enhancements such as support for infrared Pronto codes, numerous bug fixes, improved system performance, and support for the new models including the 500778 & 500777-RX. Please see the Release Notes for further details.
Firmware version 2.0 or greater for this device will only operate correctly with compatible devices that are also running the same firmware version 2.0 or greater. If your existing installation includes compatible devices with older firmware versions, you have two options:
- Either upgrade all your existing compatible devices to firmware version 2.0 or greater.
- Or downgrade the new device to a firmware version lower than 2.0.
Firmware versions for your compatible devices are available at the following MuxLab website link: https://muxlab.com/support?section=software-and-firmware
Compatible devices include the following TX and RX models: 500758, 500759, 500770, 500771, 500773, 500777, 500778.
HDMI 4×1 Switcher with Audio Extraction, 4K/60
The HDMI video switcher switches one of four sources to one display, supporting resolutions up to 4K@60Hz (4:4:4). Extracted digital audio is output as S/PDIF Toslink and analog 2CH. Audio Return Channel allows audio to be returned to source on this HDMI video switcher.
Read MoreHDMI to HDMI with Audio Extraction, 4K/60
The HDMI to HDMI with Audio Extraction, 4K/60 allows one (1) HDMI source to be distributed to one (1) HDMI display. The device supports up to 4K (3840 x 2160) video resolution at 60Hz, 8-bit color and HD audio.
The unit extracts LPCM, Dolby Digital, DTS, Dolby Digital Plus* and Atmos** digital audio from the S/PDIF TosLink port and 2CH analog audio from the 3.5mm 2CH audio port. The product is HDCP 2.2 compliant and features LED diagnostics.
Applications:
- Commercial and residential AV systems
- Classroom projector systems
- Digitial signage
- Boardroom systems
- Collaborative PC systems
HDMI / HDBT 1×4 Splitter, UHD-4K, US
The HDMI/HDBT 1×4 Splitter, UHD-4K is a HDBT Splitter accepting 1 HDMI input and distributing to 4 HDBT outputs, plus 1 HDMI output for local monitoring or for cascading up to four other splitters.
The HDMIÿaudio video splitter allows uncompressed 4K @ 30Hz HDMI, RS232 and IR signals to be transmitted over a single CAT5e/6 cable up to 131ft (40m) and a 1080p signal up to 230ft (70m). The HDMIÿaudio video splitter is also capable of bi-directional IR transmission and EDID management.
The 500454-RX HDBT Receiver is recommended as a companion device for the extended HDBT signal.
Typical Applications
- Commercial and residential AV systems
- Classroom training systems
- Digital signage
- Boardroom systems
- Collaborative PC systems
- Medical information systems