MuxLab Supports ST 2110 Allowing Studios to Access and Monitor Video Anywhere
AMSTERDAM, NETHERLANDS, IBC STAND A.30 – MuxLab will showcase its new IP-based Uncompressed Gateway Converter for SDI supporting SMPTE ST-2110 at IBC. Supporting the integration of AV equipment as studios and TV stations transition to IP-based infrastructures is a crucial part of MuxLab’s new product offerings.
The 3G-SDI/ST2110 over IP Uncompressed Gateway Converter (model 500767) connects HD- and 3G-SDI sources and displays to a local 10G Ethernet network, enabling the ability to send multiple video sources to multiple displays in nearly any combination. Users can also opt to install this system in the traditional point-to-point way in which one AV source is delivered to one display using CAT5e/6 cable from up to 30m in distance or by using duplex multimode fiber cable at up to 400m in distance. All methods of signal extension support uncompressed resolutions up to 1080p resolution @60Hz. A 1G Ethernet Switch allows the connection of additional network devices, and an RS232 port allows for the remote control of end devices. When riding on a IP infrastructure, the entire system can be accessed and controlled by MuxLab’s Pro Digital Network Controller (model 500811), which vastly simplifies the configuration of IP-based systems and gives complete access from any smartphone, tablet or third-party control system.
MuxLab will also present its new 12G-SDI Fiber Extender Kit (model 500713), which delivers 12G-SDI up to 10km over one single-mode fiber cable at all specified bit rates. This Extender Kit delivers digital video instantly between professional video equipment in the type of point-to-point video transmission most often used within television broadcasting and film studios. It is also desirable for use in post-production, mobile broadcasting vehicles, live events and CCTV applications. Video resolutions are supported up to 4K@60Hz.