HDMI over IP H.264/H.265 PoE Transmitter
The HDMI over IP H.264/H.265 PoE Extender Transmitter and Receiver combination allows HDMI source and display equipment to be extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, and supports Video Wall and Multiview capabilities in a low bandwidth, flexible, expandable and cost effective manner, without the need to install dedicated cabling systems. The exceptionally low bandwidth requirements of this device combination allows for streaming audio/video content over a local network, over WiFi, and over the Internet for distributed installations spread-out throughout the globe. The transmitter accepts a 1080p @ 60Hz video and streams the content to the Receiver, where the signal is up-scaled up to 4K @ 60Hz to be displayed on a 4K monitor. The Receiver also accepts H.264/H.265 video streams from other transmitting devices of up to 4K @ 60Hz. These devices support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
Applications:
- Audio/Video Streaming over the Internet
- Commercial and residential AV systems
- Classroom projector systems
- Digital signage
- Boardroom systems
- Collaborative PC systems
- Medical information systems
- Receiver supports up to 4K @ 60Hz (4:4:4) video streams
- Receiver up-scales 1080p @ 60Hz video streams from Transmitter and other devices up to 4K @ 60Hz
- Transmitter supports up to 1080p @ 60Hz video
- Supports Video Wall and Multiview capabilities
- Extends local audio/video transmission up to 330ft (100m) over Cat5e/6
- H.264/265 video codec, excellent for LAN, WiFi & Internet transmission
- High image quality and <200ms latency in low latency mode with H.265
- Supports 100’s of TX & RX devices depending on network bandwidth
- Supports Multicast, RTSP, RTMP, HLS, FLV and TS
- Supports SPDIF (TosLink) Audio Out (RX)
- 2CH audio insert (TX), and 2CH audio extract (RX)
- RS232 and Directional IR for remote control of end-devices
- PoE powered, via PoE (PSE) Ethernet Switch
- Managed via Pro Digital Network Controller (500811), and MuxLab Control Smartphone & Tablet App
- Video Wall Support
- Multi-view Support
- New 200ms low latency mode (reduces latency from 300ms to 200ms)
| Weight | 0.413 kg |
|---|---|
| Dimensions | 2.17 H x 5.91 W x 8.07 L in (20.50 × 15.00 × 5.50 cm) |
| filters | 1080p, Audio Extract/Insert, AV over IP, Copper/UTP, Ethernet, H.264 / H.265, HDCP, HDMI, IR, Multiview, PoE, RS232, USB, Video Wall, Video Wall & Multiview |
