HDMI over IP PoE Transmitter, Video Wall

The HDMI over IP PoE Extender allows HDMI equipment to be connected to create a Video Wall of a user configurable size (X by Y) supporting 100’s of screens, depending on network bandwidth, utilizing one receiver for each display in the array.

The transmitter unit is connected using a LAN switch (PoE or non-PoE), with maximum distances of 330ft (100m) of Cat5e/6 cable between equipment.

Set-up and configuration of the video wall function is carried out using the MuxLab ProDigital Network Controller (500811) – sold separately.

Applications:

  • Digital signage
  • Control room applications
  • Medical imagery
  • Retail
  • Hospitality / entertainment displays

Note: This device supports PoE (PD), and is intended to be powered via a PoE (PSE) Ethernet Switch. If a PoE (PSE) Ethernet Switch is unavailable, then the power supply (500992) may be purchased separately.

  • Configure a Video Wall array with 100’s of displays, depending on network bandwidth
  • HDMI 1.3
  • Supports up to 1080p resolutions
  • Visually lossless video (1 frame latency)
  • Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications
  • Transmission up to 330ft (100m) over Cat5e/6
  • Transmission up to 390ft (120m) between one (1) TX and one (1) RX when no LAN switch is used in a point-to-point scenario
  • Supports RS232 and IR transmission for remote control
  • PoE powered
  • Control via any web device (mobile, tablet) with use of model 500811 (Pro Digital Network Controller)
  • Receivers also sold individually (500754-RX)
Weight 0.500 kg
Dimensions 2.17 H x 5.91 W x 8.07 L in (20.50 × 15.00 × 5.50 cm)
filters

1080p, AV over IP, Copper/UTP, Ethernet, HDCP, HDMI, IR, Motion JPG, PoE, RS232, Video Wall

2 documents

Where to Buy?