Search results for: hdmi
SE 001049 A 100504 V2 HDMI 2.0 Extender Kit, 50m User Manual_v1.0
100504-V2
Read MoreHDMI over IP H264/H265 PoE Receiver, 4K60
The HDMI over IP H.264/H.265 PoE Receiver, 4K60 (model: 500762-RX-V2) in combination with a 500762-TX, 500763-TX or 500764-TX transmitter allows HDMI source and display equipment to be extended locally up to 330ft (100m) at up to 4K/60Hz resolution via Cat5e/6 cable in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, and supports Video Wall and Multiview capabilities in a low bandwidth, flexible, expandable and cost effective manner, without the need to install dedicated cabling systems. The exceptionally low bandwidth requirements of this device combination allows for streaming audio/video content over a local network, and over the Internet for distributed installations spread-out throughout the globe. The Receiver can accepts a 1080p/60Hz video streams and up-scale the signal up to 4K/60Hz to be displayed on a 4K monitor. The Receiver also accepts H.264/H.265 video streams from other transmitting devices of up to 4K @ 60Hz. These devices support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
Read MoreHDMI 4K/ST2110 over IP Uncomp. Gateway TX,UTP
The HDMI 4K/ST2110 over IP Uncompressed Gateway Converter supports the ST-2110 AV over IP protocol standard for Broadcast applications. The unit allows lower cost HDMI 4K equipment to be utilized in a broadcast environment, while extending end point source and sink devices at up to 1300ft (400m) via duplex multimode OM4 fiber with LC connectors, at up to 4K resolution @ 30Hz uncompressed (4K 4:4:4 8 bit and 4K 4:2:2 10 bit), in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint configurations are also supported by connecting several units to a 10G Ethernet network. The device supports ST-2022-7 (Class D) Redundancy for critical fail-safe applications allowing the audio/video signal to run over two independent 10G Ethernet Networks. The unit provides a 1G Ethernet Network port for control via 3rd party management platforms supporting a RestAPI, or NMOS (IS-04 for discovery and IS-05 for connectivity management).
The HDMI 4K/ST2110 over IP Uncompressed Gateway Converter also supports an RS232 port for remote control of end devices (TX side).
Read MoreHDMI 4K/ST2110 over IP Uncomp. Gateway RX,UTP
The HDMI 4K/ST2110 over IP Uncompressed Gateway Converter supports the ST-2110 AV over IP protocol standard for Broadcast applications. The unit allows lower cost HDMI 4K equipment to be utilized in a broadcast environment, while extending end point source and sink devices at up to 1300ft (400m) via duplex multimode OM4 fiber with LC connectors, at up to 4K resolution @ 30Hz uncompressed (4K 4:4:4 8 bit and 4K 4:2:2 10 bit), in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint configurations are also supported by connecting several units to a 10G Ethernet network. The device supports ST-2022-7 (Class D) Redundancy for critical fail-safe applications allowing the audio/video signal to run over two independent 10G Ethernet Networks. The unit provides a 1G Ethernet Network port for control via 3rd party management platforms supporting a RestAPI, or NMOS (IS-04 for discovery and IS-05 for connectivity management).
The HDMI 4K/ST2110 over IP Uncompressed Gateway Converter also supports an RS232 port for remote control of end devices (TX side).
Read MoreSE 001018 A 500841 V2 HDMI3G SDI Dual Display, 4K30 User Manual_v1.0
500841-V2
Read MoreHDMI 2.1 48Gbps Audio De-embedder
The HDMI 2.1 48Gbps Audio De-Embedder (model: 500514) can extract audio signals from an HDMI source or ARC-compatible TV and send them to an analog stereo audio output and an S/PDIF digital audio output. It supports data rates up to 48Gbps to comply with HDMI 2.1 and HDCP 2.3 requirements. In addition, the unit allows the HDMI source to be looped out and extended to a local display; it also includes several features to facilitate integration such as EDID management and cable equalization providing an easy solution for HDMI installations to send audio signals to a stereo audio or surround sound system.
Applications:
- Home Entertainment Systems
- Gaming Setups
- Professional AV Installations
- Digital Signage Educational
- Institutions Boardroom Systems
HDMI 2.1 48Gbps 1×8 Splitter
The HDMI 2.1 48Gbps 1×8 Splitter (model: 500512) is a versatile device with various applications, offering advanced features for splitting HDMI signals.
The HDMI 2.1 48Gbps 1×8 Splitter’s ability to handle high data rates, support 8K resolution, and provide features like EDID management and cable equalization makes it suitable for a wide range of applications in both residential and commercial settings.
Applications:
- Home Entertainment Systems
- Gaming Setups
- Professional AV Installations
- Digital Signage
- Educational Institutions
- Medical Imaging
- Broadcasting and Production Event Venues
SE 001043 A 500514 HDMI 2.1 48Gbps Audio De Embedder User Manual_v1.0
500514
Read MoreSE 001036 A 500512 HDMI 2.1 48Gbps 1×8 Splitter User Manual_v1.0
500512
Read MoreSE 001032 A 500510 HDMI 2.1 48Gbps 1×2 Splitter User Manual_v1.0
500510
Read More