HDMI over IP H.264/H.265 PoE Transmitter, 4K/60

The HDMI over IP H.264/H.265 PoE Transmitter, 4K/60 allows HDMI source equipment to be extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable and is compatible with the Muxlab 500762-RX Receiver to support point-to-point, point-to-multipoint and multipoint-to-multipoint configurations, Video Wall and Multiview capabilities in a low bandwidth expandable and cost effective manner, without the need to install dedicated cabling systems. The exceptionally low bandwidth requirements of this device in the H.264/H.265 video codec setting allows for streaming audio/video content over a local network, and over the Internet for distributed installations spread throughout the globe. The unit also supports a MotionJPG (MJPG) video codec setting for low latency applications. The transmitter accepts a 4K video @ 60Hz and streams the content to an H.264/H.265 Receiver, such as the MuxLab 500762-RX, to be displayed on a 4K monitor. The Transmitter may also send H.264/H.265 video streams to other H.264/H.265 compatible Receiving devices. The device supports PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.

Applications:

  • Audio/Video Streaming over LAN and Internet
  • Commercial and residential AV systems
  • Classroom projector systems
  • Digital signage
  • Boardroom systems
  • Medical information systems
  • Supports up to 4K @ 60Hz video resolution
  • Extends local audio/video transmission up to 330ft (100m) over Cat5e/6 and may transmit globally over the internet
  • 264/265 video codec, excellent for LAN and Internet transmission
  • MotionJPG (MJPG) video codec, for low latency applications
  • High image quality and 200ms latency in low latency mode with H.265
  • Supports Multicast, RTSP, RTMP, HLS, FLV, and TS
  • Supports embedding of 2CH audio
  • HDMI and 2CH Audio loop-out
  • RS232 and Directional IR for remote control of end-devices
  • PoE powered, via PoE (PSE) Ethernet Switch
  • Compatible with the MuxLab 500762-RX Receiver to support Matrix connectivity, Video Wall and Multiview capabilities
  • Supports 100’s of TX & RX devices depending on network bandwidth
  • Managed via Pro Digital Network Controller (500811 and 500812), MuxControl iOS and Android App, and third party Apps
Weight 0.495 kg
Dimensions 2.17 H x 5.91 W x 8.07 L in (20.50 × 15.00 × 5.50 cm)
filters

1080p, 4K/30, 4K/60, Audio Extract/Insert, AV over IP, Copper/UTP, Ethernet, H.264 / H.265, HDCP, HDMI, IR, Multiview, PoE, RS232, USB, Video Wall, Video Wall & Multiview

4 documents

Where to Buy?