Search results for: hdmi
HDMI 1×8 Splitter, UHD-4K
Replacement models: 500427 and 500512.
The HDMI 1×8 Splitter allows one HDMI source to be distributed to up to eight HDMI displays. The HDMI audio video splitter supports up to 1080p, 12-bit Deep color and HD audio. The splitter is HDCP 1.3 compliant and features LED diagnostics. Additionally, all HDMI connectors are on the rear panel for neater cabling.
Typical Applications for this HDMI audio video splitter:
- Commercial and residential AV systems
- Classroom training systems
- Digital signage
- Boardroom systems
- Collaborative PC systems
- Medical video systems
HDMI 4X4 Matrix Switch Kit, HDBT, PoC, 4K/60, US
The HDMI 4×4 Matrix Switch Kit, HDBT, PoC, 4K/60 (4:2:0) allows up to four (4) different HDMI sources to be connected and/or distributed to up to four (4) HDMI displays. Theÿ4K HDMI Matrix Switch supports three (3) HDBT outputs for long distance connectivity and one (1) HDMI output for local connectivity. The Kit includes three (3) HDBT PoC Receivers which are powered by the Matrix Switch, and support distances up to 70m at 1080p and 40m at 4K via Cat5e cable. Management functions for this 4K HDMIÿMatrixÿSwitch include front panel pushbutton, IR, RS232 and webserver interface. Software updated are supported via a USB port.
- Applications:
- Commercial and residential AV systems
- Classroom training systems
- Digital signage
- Boardroom systems
- Collaborative PC systems
- Medical information systems
HDMI Extender Kit, 110-220V
The HDMI Wall-Plate Extender Kitÿallows HDMI equipment to be connected up to 150 ft (45m) via two (2) Cat5e unshielded twisted pair cables in a point-to-point configuration at 1080p resolution. HDMI Wall-Plate Extender Kit also supports 1080p Deep Color up to 90 ft (27m) via Cat6 cables. The kit comes with one (1) transmitter, one (1) receiver and one (1) power supply. The 500401-WP may also be used without external power.</p
Read MoreHDMI 2.0 Extender Kit
The HDMI 2.0 Extender Kit allows HDMI equipment supporting uncompressed video up to 4K/60 (4:4:4) resolutions to be connected over Cat6a/7 unshielded twisted pair cable in a point-to-point configuration at distances up to 30m at 4K/60, 40m at 4K/30 and 45m at 1080p. The unit supports HDCP 2.2, and audio pass-through up to Dolby Atmos & DTS:X. The HDMI 2.0 Extender Kit supports a 1-way IR port (carrier wave) for remote control of end devices. The kit comes with one (1) Transmitter and one (1) Receiver as well as an IR Emitter and IR Sensor for remote control application.
Read MoreVGA To HDMI Converter with Scaler
The VGA to HDMI Converter with Scaler is designed to scale analog video from PC input source to digital HDMI output of wide-range HD and PC resolutions up to 1080p or WUXGA. Besides video scaling, the VGA to HDMI Converter can convert analog stereo audio input to digital format and embed it to HDMI output as 2-Channel LPCM. This unit has a comprehensive resolution button that allows the user to select a variety of output resolutions and adjust for best picture quality.
Read MoreHDMI 4K / ST2110 over IP Uncompressed Gateway Converter RX, MM.
The HDMI 4K/ST2110 over IP Uncompressed Gateway Converter supports the ST-2110 AV over IP protocol standard for Broadcast applications. The unit allows lower cost HDMI 4K equipment to be utilized in a broadcast environment, while extending end point source and sink devices at up to 1300ft (400m) via duplex multimode OM4 fiber with LC connectors, at up to 4K resolution @ 30Hz uncompressed (4K 4:4:4 8 bit and 4K 4:2:2 10 bit), in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint configurations are also supported by connecting several units to a 10G Ethernet network. The device supports ST-2022-7 (Class D) Redundancy for critical fail-safe applications allowing the audio/video signal to run over two independent 10G Ethernet Networks. The unit provides a 1G Ethernet Network port for control via 3rd party management platforms supporting a RestAPI, or NMOS (IS-04 for discovery and IS-05 for connectivity management).
The HDMI 4K/ST2110 over IP Uncompressed Gateway Converter also supports an RS232 port for remote control of end devices (TX side).
Applications:
- Commercial broadcast AV systems
- News/sports/TV stations
- Movie networks
HDMI 4K / ST2110 over IP Uncompressed Gateway Converter TX, MM.
The HDMI 4K/ST2110 over IP Uncompressed Gateway Converter supports the ST-2110 AV over IP protocol standard for Broadcast applications. The unit allows lower cost HDMI 4K equipment to be utilized in a broadcast environment, while extending end point source and sink devices at up to 1300ft (400m) via duplex multimode OM4 fiber with LC connectors, at up to 4K resolution @ 30Hz uncompressed (4K 4:4:4 8 bit and 4K 4:2:2 10 bit), in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint configurations are also supported by connecting several units to a 10G Ethernet network. The device supports ST-2022-7 (Class D) Redundancy for critical fail-safe applications allowing the audio/video signal to run over two independent 10G Ethernet Networks. The unit provides a 1G Ethernet Network port for control via 3rd party management platforms supporting a RestAPI, or NMOS (IS-04 for discovery and IS-05 for connectivity management).
The HDMI 4K/ST2110 over IP Uncompressed Gateway Converter also supports an RS232 port for remote control of end devices (TX side).
Applications:
- Commercial broadcast AV systems
- News/sports/TV stations
- Movie networks
HDMI Extender Kit, HDBT, UHD-4K
This HDMI extender 4K allows HDMI equipment to be connected up to 131ft (40m) at 4K/30 (4:4:4) or 4K/60 (4:2:0) resolutions, or 230 ft (70 m) at resolutions up to 1080p via one (1) Cat 5e/6 unshielded twisted pair cable in a point-to-point configuration. This HDMI extenderÿ4K kit comes with one (1) transmitter, one (1) receiver, one (1) IR Emitter, and one (1) IR sensor.
Applications
- Digital signage
- Commercial AV systems
- Classroom projector systems
- Boardroom systems
- Collaborative PC systems
- Medical information systems
CEDIA 2019: MuxLab Showcases Its H.264/H.265 HDMI PoE Extender, Adds 4K@60Hz Version
At CEDIA, MuxLab Unveils New HDMI Solutions that Integrate, Upscale and Extend 4K Content Anywhere
While MuxLab is committed to providing integrators with the best variety of IP-based solutions that deliver 4K content around the home, this year’s CEDIA will see some alternative solutions for integrating 4K content in a seamless manner. Debuting at CEDIA this year is the MuxLab 8×8 HDBT Matrix PoE, 4K (model 500413). It connects eight…
Read More