Search results for: hdmi
HDMI 4K/60 KVM Over IP Receiver, UTP
The HDMI 4K/60 KVM over IP Extender is based on SDVoE technology and allows HDMI based servers/workstations supporting up to 4K @ 60Hz resolution to be connected and extended to one or more operators that can connect with and manage any of the servers/workstations in a KVM application.
The operator may connect a remote monitor, keyboard & mouse and powered audio speakers to any of the servers/workstations being managed. This system also supports Smart Whiteboard applications via the HDMI and USB ports. 100’s of servers/workstations may be managed, depending on network bandwidth, utilizing one Receiver for each operator and one Transmitter per server/workstation. Each Transmitter (500760- TX-KVM) and Receiver (500760-RX-KVM) can be connected via Cat5e/6 cable up to 330ft (100m) from a 10Gig Ethernet Switch.
The HDMI 4K/60 KVM over IP Extender also supports RS232 and 2-way IR for remote management of end devices. Each unit comes with a 12VDC @ 3A power supply, with multiblades for North America, UK, Europe and Australia, and also includes a wall mount bracket kit, and IR sensor & emitter for remote management of end devices.
The MuxLab Pro Digital Network Controller is available to simplify centralized configuration and control, software updates and allows for connectivity management from MuxControl and other third party applications running on smartphones and tablets.
Read MoreHDMI 4K/60 KVM Over IP Transmitter, UTP
The HDMI 4K/60 KVM over IP Extender is based on SDVoE technology and allows HDMI based servers/workstations supporting up to 4K @ 60Hz resolution to be connected and extended to one or more operators that can connect with and manage any of the servers/workstations in a KVM application.
The operator may connect a remote monitor, keyboard & mouse and powered audio speakers to any of the servers/workstations being managed. This system also supports Smart Whiteboard applications via the HDMI and USB ports. 100’s of servers/workstations may be managed, depending on network bandwidth, utilizing one Receiver for each operator and one Transmitter per server/workstation. Each Transmitter (500760- TX-KVM) and Receiver (500760-RX-KVM) can be connected via Cat5e/6 cable up to 330ft (100m) from a 10Gig Ethernet Switch.
The HDMI 4K/60 KVM over IP Extender also supports RS232 and 2-way IR for remote management of end devices. Each unit comes with a 12VDC @ 3A power supply, with multiblades for North America, UK, Europe and Australia, and also includes a wall mount bracket kit, and IR sensor & emitter for remote management of end devices.
The MuxLab Pro Digital Network Controller is available to simplify centralized configuration and control, software updates and allows for connectivity management from MuxControl and other third party applications running on smartphones and tablets.
Read MoreHDMI over IP PoE Receiver, Video Wall
The HDMI over IP PoE Extender allows HDMI equipment to be connected to create a Video Wall of a user configurable size (X by Y) supporting 100’s of screens, depending on network bandwidth, utilizing one receiver for each display in the array.
The transmitter unit isÿconnected using a LAN switch (PoE or non-PoE), with maximum distances of 330ft (100m) of Cat5e/6 cable between equipment.
Set-up and configuration of the video wall function is carried out using the MuxLab ProDigital Network Controller (500811) -ÿsold separately.
Applications:
- Digital signage
- Control room applications
- Medical imagery
- Retail
- Hospitality / entertainment displays
Note:ÿThis device supports PoE (PD), and is intended to be powered via a PoE (PSE) Ethernet Switch. If a PoE (PSE) Ethernet Switch is unavailable, then the power supply (500992) may be purchased separately.
Read MoreHDMI over IP PoE Transmitter, Video Wall
The HDMI over IP PoE Extender allows HDMI equipment to be connected to create a Video Wall of a user configurable size (X by Y) supporting 100’s of screens, depending on network bandwidth, utilizing one receiver for each display in the array.
The transmitter unit is connected using a LAN switch (PoE or non-PoE), with maximum distances of 330ft (100m) of Cat5e/6 cable between equipment.
Set-up and configuration of the video wall function is carried out using the MuxLab ProDigital Network Controller (500811) – sold separately.
Applications:
- Digital signage
- Control room applications
- Medical imagery
- Retail
- Hospitality / entertainment displays
Note: This device supports PoE (PD), and is intended to be powered via a PoE (PSE) Ethernet Switch. If a PoE (PSE) Ethernet Switch is unavailable, then the power supply (500992) may be purchased separately.
Read MoreHDMI Over IP Receiver with PoE
The HDMI over IP extender allows HDMI equipment to be connected up to 330feet (100m) @ 1080p via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several Transmitters and Receivers to the same Ethernet network. The Transmitter (500752-TX) and Receiver (500752-RX) also support PoE (PD) if used with a PoE (PSE) Ethernet Switch. The HDMI over IP extender kit comes with one (1) Transmitter and one (1) Receiver ideal for starting to set up your HDMI over IP network. The IR Emitter and IR Sensor, if required, may be purchased separately for remote control applications.
For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet switch must have Gigabit ports, DHCP Server capability and IGMP communications protocol. MuxLab recommends using the Cisco SG300 Series Managed Switches.
The MuxLab Pro Digital Network Controller (500811) is available to simplify the configuration and utilization of the MuxLab IP based products via an Ethernet web interface, and supports third party management via smartphone and tablet.
Applications: Commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, and medical information systems.
Note: This device supports PoE (PD), and is intended to be powered via a PoE (PSE) Ethernet Switch. If a PoE (PSE) Ethernet Switch is unavailable, then the power supply (500992) may be purchased separately.
Read MoreHDMI Over IP Transmitter with PoE
The HDMI over IP extender allows HDMI equipment to be connected up to 330feet (100m) @ 1080p via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several Transmitters and Receivers to the same Ethernet network. The Transmitter (500752-TX) and Receiver (500752-RX) also support PoE (PD) if used with a PoE (PSE) Ethernet Switch. The IR Emitter and IR Sensor, if required, may be purchased separately for remote control applications.
For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet switch must have Gigabit ports, DHCP Server capability and IGMP communications protocol. MuxLab recommends using the Cisco SG300 Series Managed Switches.
The MuxLab Pro Digital Network Controller (500811) is available to simplify the configuration and utilization of the MuxLab IP based products via an Ethernet web interface, and supports third party management via smartphone and tablet.
Applications: Commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, and medical information systems.
Note: This device supports PoE (PD), and is intended to be powered via a PoE (PSE) Ethernet Switch. If a PoE (PSE) Ethernet Switch is unavailable, then the power supply (500992) may be purchased separately.
Read More3G-SDI to HDMI Extender Kit
The MuxLab 3G-SDI to HDMI Extender Kit converts 3G-SDI to HDMI and then transmits it up to 330 ft / 100m via single Cat5e/6 cable at all resolutions in a point-to-point configuration. The 3G-SDI to HDMI Extender Kit supports transmission of up to 2.97/3.0 Gbps uncompressed, un-encrypted digital video (optionally including embedded Audio and/or Time Code) within television facilities and between professional video equipment.
The LongReach 3G-SDI to HDMI Extender Kit (500716) converts 3G-SDI to HDMI and then transmits it up to 500ft / 150m via single Cat5e/6 cable at all resolutions in a point-to-point configuration (500716).
Read MoreLongReach 3G-SDI to HDMI Extender Kit
The MuxLab 3G-SDI to HDMI Extender Kit converts 3G-SDI to HDMI and then transmits it up to 330 ft / 100m via single Cat5e/6 cable at all resolutions in a point-to-point configuration. The 3G-SDI to HDMI Extender Kit supports transmission of up to 2.97/3.0 Gbps uncompressed, un-encrypted digital video (optionally including embedded Audio and/or Time Code) within television facilities and between professional video equipment.
The LongReach 3G-SDI to HDMI Extender Kit (500716) converts 3G-SDI to HDMI and then transmits it up to 500ft / 150m via single Cat5e/6 cable at all resolutions in a point-to-point configuration (500716).
Read More3G-SDI to HDMI Converter
The 3G-SDI to HDMI Converter (500717) allows SDI equipment to be connected to an HDMI Display. The 3G-SDI to HDMI Converter converts the SDI signal back to HDMI, supporting resolutions of 480i (SD-SDI), 720p/1080i (HD-SDI) and 1080p (3G-SDI). ÿThe 3G-SDI to HDMI Converter provides a low jitter and re-clocked outputs allowing for unit daisy chain.
Typical Applications:
- Video production & Broadcasting
- Studio-to-studio & Post production
- Outside broadcasting vehicle
- Mobile video & Live Events
- SDI camcorder
- Medical imaging display
HDMI to VGA Converter
The MuxLab HDMI to VGA Converter allowsÿaÿsingle HDMI channel to be converted to analog VGA/RGB.
Theÿconverter allows non-HDCP compliant HDMI sources to be used withÿlegacy VGA/RGB equipment thereby helping toÿmaximize investment in existing VGA hardware.
Read More